IMG 0003 comes new version of iPhone 2 with longer battery life

While the new iPhone offers features renovated over its predecessor, there are still many users who prefer to stick to the second generation of the Apple tablet. Thinking of them signing the apple released a new model of iPhone 2 offering better energy efficiency.

This is the fourth variation of iPad 2 that the Cupertino brought to market , hence its name is iPad 2.4 . The main difference in this version is the inclusion of a new processor 32 nm , significantly smaller than the 45 nm previously used by Apple.

The new hardware increases battery life by 16 percent during web browsing and 18% while playing videos. But that’s not all as further optimizes performance by 30% while running games. With respect to software must mention the inclusion of IOS 5.1.

The problem with this release is that impossible to know which variant are buying iPad 2 . Since Apple uses the same package for all models of the tablet, the only way to know if we have an iPhone 2.4 (or one of its predecessors) is out of the box.

would be nice if Apple and resellers to help customers get the improved model of iPhone 2. A simple marketing campaign or an identification mark would be enough to save inconvenience or disappointments to those who purchase the $ 399 tablet.

Track | AnandTech.

Save Battery Calibrating the Android Smartphone battery of our If you’re using Android, you will probably ever tried, charging the battery, this level never reaches 100%, and stays at 95 or 90%. And is that the battery life is one of the negatives for thousands of Smartphone users, for rarely has a duration commensurate with the performance of these devices. For those who are not very happy with the battery life of your smartphone, you can optimize the device so that one can get the most out of the battery.

One of the most famous tricks is the “Bump Charge”, with which we extend the life of our battery easily and make sure that, once loaded, the phone is truly a 100% battery without having to do anything special. This 5 0 10% of battery sometimes fails to fully charge could mean up to 10 or 15 minutes extra, sometimes essential for the phone runs out off the street.

Note that following the instructions mention not damage the device in any way, and you can apply this advice whether you are a user of Samsung and HTC, Motorola or LG. Fits all Android devices in general.


“Bump Charge” to extend the battery life:

produce a great impact on the battery performance, so it is important that you do only use these services only when needed. Weather you are not using them and have them on, be an unnecessary drain on the battery.

The “Bump Charge” is a trick with which you can be sure that always load your device to 100% . Just do it once. The steps are:

When the battery in your Android is about to shut down, connect the power supply and charge for about 8 hours or more. After this time, the notification LED and will have turned green. Disconnect the device from the power supply, turn it off and load it again for an hour. The notification light will have changed to orange, which means that in reality it was not loaded at all. unplug it again, turn on and wait a couple of minutes. Back to connect to the stream, if the LED light automatically turns green, it means that your battery is, for sure, 100%.

If not, turn off the phone and reload until the LED turns green.

load itself automatically when it reaches 100%. With the proper calibration of the battery, you have an extra length did not have before. Still, it is likely that this trick will not work properly and the problem with your battery is due to another issue. With the “Bump Chargue” of what we make is that in a real burden to the end.

Save Battery Calibrating the Android Smartphone battery of our If you’re using Android, you will probably ever tried, charging the battery, this level never reaches 100%, and stays at 95 or 90%. And is that the battery life is one of the negatives for thousands of Smartphone users, for rarely has a duration commensurate with the performance of these devices. For those who are not very happy with the battery life of your smartphone, you can optimize the device so that one can get the most out of the battery.

One of the most famous tricks is the “Bump Charge”, with which we extend the life of our battery easily and make sure that, once loaded, the phone is truly a 100% battery without having to do anything special. This 5 0 10% of battery sometimes fails to fully charge could mean up to 10 or 15 minutes extra, sometimes essential for the phone runs out off the street.

Note that following the instructions mention not damage the device in any way, and you can apply this advice whether you are a user of Samsung and HTC, Motorola or LG. Fits all Android devices in general.


“Bump Charge” to extend the battery life:

produce a great impact on the battery performance, so it is important that you do only use these services only when needed. Weather you are not using them and have them on, be an unnecessary drain on the battery.

The “Bump Charge” is a trick with which you can be sure that always load your device to 100% . Just do it once. The steps are:

When the battery in your Android is about to shut down, connect the power supply and charge for about 8 hours or more. After this time, the notification LED and will have turned green. Disconnect the device from the power supply, turn it off and load it again for an hour. The notification light will have changed to orange, which means that in reality it was not loaded at all. unplug it again, turn on and wait a couple of minutes. Back to connect to the stream, if the LED light automatically turns green, it means that your battery is, for sure, 100%.

If not, turn off the phone and reload until the LED turns green.

load itself automatically when it reaches 100%. With the proper calibration of the battery, you have an extra length did not have before. Still, it is likely that this trick will not work properly and the problem with your battery is due to another issue. With the “Bump Chargue” of what we make is that in a real burden to the end.


class=”article first_main_article” readability=”41″>

Greg Kroah-Hartman has released kernel “long haul” 3.0.20, in addition to also announce the availability of the 3.2.5 kernel. In both cases the news is on the including a patch that fixes the problem with the detection and enabling or disabling the feature ASPM in different outfits.

 linux laptop kernel 3.2.5 addresses issues ASPM battery regression

As mentioned earlier in MuyLinux, the problem with the management of this energy saving feature generated a significant reduction in battery life on laptops , a conflict that have dedicated Phoronix much attention and some analysts said they did not really exist.

seems that the problem was real, I could never prove it, and our readers have not said much about it, but evidence was presented in other media, and the new kernel is stated that energy consumption on a ThinkPad yes X220 had that problem has been reduced by 5 watts, a respectable amount , something that was already talking about a few days ago Rodrigo Russo.

That could end a conflict that took months to be resolved directly in the kernel, but on the other hand, as discussed in The H Open, there is another more significant problem, which affects the characteristics of energy saving integrated graphics chip on Intel Sandy Bridge Series , as the current Linux kernel does not activate the feature called RC6 that just takes advantage of that savings. However can be enabled in the boot parameters of the distro with the flag i915.i915_enable_rc6 = 1 .

Powered By WizardRSS.com | Full Text RSS Feed | Amazon Store Builder | Android Games | WordPress Tutorials

The battery life is one of the points against smartphones, which are becoming more powerful but their autonomy is too dependent on the screen or processor, decreasing its duration. Apple is working on a new and imaginative solutions, as used to provide the company: a new battery which …

Tired of having to charge the battery in your smartphone evening and night itself too? You’re in luck: a group of Northwestern University engineers are stepping up the matter, and assures us that the battery of your dreams is much closer than we might expect. This team of researchers …

The recent launch of the iPhone 4S was a worldwide success, although many users complained of a problem in common: low battery life. After hearing the complaints from Apple announced that the problem was not in the new smartphone but iOS 5, the latest version of …

The launch of the iPhone 4S was a success for Apple and while most people agree is a great phone that many have a particular complaint: the battery life. The reviews for this inconvenience have become a constant but luckily the Cupertino

have promised …

The launch of the iPhone 4S was a success for Apple and while most people agree is a great phone that many have a particular complaint: the battery life. The reviews for this inconvenience have become a constant but luckily the Cupertino have promised [...]

first_main_article” class=”article readability=”39″>We

time discussing battery problems experienced by some users of Linux distributions , especially for those with the 2.6.38 kernel. The duration of these batteries can be significantly reduced in that case, even with newer kernels 3.0 and 3.1-future, but at Phoronix have some tips to help prevent these problems.

 linux laptop1 tricks to extend your laptop battery Intel Linux

an exciting new Michael Larabel article offers some tips to not only solve that problem, but for our laptops even more efficient power consumption, and focus, though, the users laptops with Intel chips (both CPU and GPU), and the new Sandy Bridge. Here are the tips:

Activate

  • ASPM : Add “pcie_aspm = force” boot arguments in our kernel will allow us to ensure that the problem with nuclei that ASPM-off series the main problem of kernel 6.2.38-away.
  • i915.i915_enable_rc6 = 1 : This feature allows the GPU into a state of low power consumption when the GPU is idle without work.
  • i915.i915_enable_fbc = 1 : This option enables the kernel called FBC (Frame-Buffer Compression) for Intel graphics controllers. It uses less bandwidth, memory, and this contributes to lower power consumption.
  • i915.lvds_downclock = 1 : the LVDS clock frequency may also be reduced and save energy, even on systems that do not support LVDS complete this can cause an annoying flicker on the screen.
  • These options can be added to the boot loader in the file GRUP / boot / grub / grub.cfg to make them permanent, or can be passed by hand to i915 load the module in case of counting on such chips. If you do not use the Intel graphics driver for Linux these changes will not offer any improvement in the autonomy of your battery.

    Phoronix tests conducted with teams that did possess such GPUs and showed that indeed the battery consumption with these options enabled can make significant improvements in various scenarios, so if you have a laptop with Intel GPU, try it.

    Powered By WizardRSS.com | Full Text RSS Feed | Amazon Plugin | Settlement Statement | WordPress Tutorials